Canon D1120, D1150, D1170, D1180 E001 1 Error Code
The Canon D1120, D1150, D1170, D1180 E001 1 Error Code is another high temperature error reading located by one of the thermistors in the fusing assembly. Below you will find what the service manual has to say on the subject along with links to order a replacement fuser if needed and illustrated instructions on how to replace it.
Canon imageCLASS D1120, D1150, D1170, D1180 Fuser
Service Manual Advice for the Canon D1120, D1150, D1170, D1180 E001 1 Abnormally high temperature (detected by sub thermistor)
The sub thermistor detected an abnormally high temperature during temperature control.
– Check the connector of the fixing film unit.
– Replace the fixing film unit. Canon D1120, D1150, D1170, D1180 Fuser Removal
– Replace the Engine controller PCB.
Additional Information on the Canon D1120, D1150, D1170, D1180 E001 1 Error Code
- Turn the machine off and let it sit for 15 to minutes then turn back on. Sometimes it’s as simple as that.
- Check the machine for proper ventilation.
- Make sure the environment meets the machines specifications. In other words, don’t run the machine in extremely hot areas.
- Make sure the machine is not sitting under direct sunlight.
- Make sure the paper type settings match the paper being used.
- If all else fails the next step is to replace the fuser. Canon D1120, D1150, D1170, D1180 Fuser Removal
