Canon D1120, D1150, D1170, D1180 E000 0 Error Code
These fuser tend to hold up pretty well but it might get a fuser error over time. The Canon D1120, D1150, D1170, D1180 E000 0 Error Code means the machine failed to get up to the desired temperature will starting up. Below you will see what the service manual has to say along with a few additional tips that might help you resolve the issue. However, if you find that the fuser will need replaced then you can find options to buy the fuser along with a link to the illustrated fuser replacement instructions.
Canon imageCLASS D1120, D1150, D1170, D1180 Fuser
Service Manual Advice for the Canon D1120, D1150, D1170, D1180 E000 0 Startup error
The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
– Check the fixing film connector.
– Replace the fixing film unit. Canon D1120, D1150, D1170, D1180 Fuser Removal
– Replace the Engine controller PCB.
Additional information on the Canon D1120, D1150, D1170, D1180 E000 0 Error Code
- Turn the machine off and back on. Every once in awhile they don’t get up to temp in time.
- Â Check the power source. Plug straight into a wall for testing. Manufactures don’t recommend plugging the device into power strips and battery back ups.
- Remove the fuser and check the connectors.
- Canon D1120, D1150, D1170, D1180 Fuser Removal
