HP LaserJet Enterprise M606, M605, M604 50.9 Fuser Error Troubleshooting
The HP LaserJet Enterprise M606, M605, M604 50.9 Fuser Error is yet another low temperature error being reported in the fusing assembly. With a few tips you might be able to get your machine back up and running and reduce the cost of purchasing a replacement fuser. However, if you need to get a replacement fuser then below you can find links to purchase one. Also, you will find a link to the illustrated replacement instructions on the fuser.
Fuser 110V – LJ Ent 600 / M604 / M605 / M606 series E6B67-67901
Service Manual Troubleshooting for the HP LaserJet Enterprise M606, M605, M604 50.9 Fuser Error
Low fuser temp 2 error.
Recommended action
1. Turn printer power off and then back on again.
2. Ensure media type and fuser mode are correct for media being used.
3. If error returns, power off the unit and wait till fuser cooled.
4. Remove fuser and check fuser for damage or obstructions.
5. Re-Install fuser and test.
6. If the error persists, replace the fuser assembly. Click on the Link = HP LaserJet Enterprise M606, M605, M604 Fuser Replacement
7. If error returns, replace the power supply unit.
8. If error returns, replace the DC controller PC board assembly.
[wwcAmzAffProducts asin=”B0170ODNAW”][/wwcAmzAffProducts]
