HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error

 

HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error Troubleshooting

Low Heat Errors like the HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error are more common and typically more serious than some other errors. However, some can be fixed without the need for fuser replacement, which could save lots of money. Below you will find out what the service manual has to say on the topic and a few tips of my own. Also, you will find a link to the fuser replacement as well as links to purchase a replacement fuser if needed.

HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error

 

Fuser 110V – LJ Ent 600 / M604 / M605 / M606 series E6B67-67901

Service Manual Troubleshooting Tips for the HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error 
Low temperature thermistor 1.
1. Reinstall the fuser. Check the connector (J128) between the fuser and the printer. If it is damaged, replace the fuser.
2. Reconnect the connector (J82) on the DC controller PCA.
3. Replace the fuser. HP LaserJet Enterprise M606, M605, M604 Fuser Replacement
4. W = 2: Reconnect the connector (J62) on the low-voltage power supply PCA.
5. If the error persists, replace the power supply unit.

Other Troubleshooting Tips for the HP LaserJet Enterprise M606, M605, M604 50.3 Fuser Error 

  1. Turn the machine off then back on.
  2. Let the machine cool down for 15 to 20 minutes unplugged from the wall outlet then try again.
  3. Make sure the machine is plugged into a wall outlet and not on a powerstrip or battery backup.
  4. Remove the fuser and check the connectors going into the heating element.
  5. Replace the Fuser
  6. Click on the Link = HP LaserJet Enterprise M606, M605, M604 Fuser Replacement

[wwcAmzAffProducts asin=”B0170ODNAW”][/wwcAmzAffProducts]

We will be happy to hear your thoughts

Leave a reply

Shopping cart