Instructions for the Okidata B710 and B720 Maintenance Reqd Reset
After 200,000 prints your machine will come up with the Okidata B710 and B720 Maintenance Reqd. message. The good news is that you are using your machine the way it was intended. In my opinion, these machines tend to work best when using heavily. While they might not be as good as some higher end HP models I would compare them to the P3015 series. Below you will find the instructions to reset the maintenace required message followed by a link to the replacement instructions for the parts of the PM kit.
Oki Maintenance Kit, 200000 Yield (58284203)
Features
- OKI B710dn B710n Maintenance Kit (200 000 Yield)
- OKI B710dn B710n Maintenance Kit (200 000 Yield)
- OEM Mono Laser Parts
Oki Maintenance Kit, 200000 Yield (58284203)
–
–
Okidata B710 and B720 Maintenance Reqd. Reset Procedure
To enter the Diagnostics area:
Turn the printer power OFF.
Press and Hold the MENU^ and Enter buttons.
Turn the printer power ON (you can release these buttons as soon as “loading … ’’ is displayed.
The Operator Panel reads “Diagnosticsâ€
There is a list of Test Options and settings.
Press the Down Arrow highlight “Maintenance Info.†Press the Enter button
The Operator Panel Display reads “Maintenance Info†with setting listed.
Reset Maintenance reqd. is highlighted. Press Enter
Reset Maint. Reqd. is displayed and Execute is highlighted.
Press Enter.
The Display reads — Resetting Maintenance Required.
This completes the process.