Lexmark T522, T520 Error Code 925 Incorrect Lamp Type

 

Service Tips for the Lexmark T522, T520 Error Code 925

The Lexmark T522, T520 Error Code 925  message is pretty straight forward. The machine thinks that the wrong lamp is installed.  Lots of these Lexmark fusers look the same and can accidentally be installed in the wrong machine if you have them laying around not properly marked. Also, you might run into this error of you just purchased a replacement fusing assembly and ordered in the wrong voltage fuser. I’m sure there might be a few other occasions you get this error. Perhaps you were trying to rebuild a unit or someone was rebuilding a unit and put the wrong lamp in and failed to test it before it was shipped out. Or maybe something is wrong with the lamp inside the unit and it just threw this error code. Anyway. Below you will find links to purchase the correct fusing unit. Also, you will find the what the service manual has to say on the subject and at the bottom of the article you will find a link to the replacement instructions.

Lexmark T522, T520 Error Code 925

Lexmark Optra T 522 520 Fuser Kit 99A2423 Refurbished

Lexmark T522, T520 Error Code 925 Description
Indicates the wrong fuser lamp is installed. Be sure the correct type of fuser lamp is installed in the printer.

Service Manual Service Tips for the Lexmark T522, T520 Error Code 925
If the correct lamp is installed and a 925 error remains, the problem may be due to the following:
• The fuser may have reached standby temperature too quickly.
• The line voltage may be above the maximum rating for the printer.

1. Fuser Lamp (Incorrect Lamp/925 Service Error)
Install the correct voltage and wattage lamp or fuser assembly.
If the correct fuser lamp is installed and the 925 error remains, the fuser may have reached standby temperature too quickly. Check that the line voltage is not exceeding the maximum rating for the printer.
Click on the link below for the fuser replacement instructions

 —  Lexmark T522, T520 Fuser Replacement Procedure  —

We will be happy to hear your thoughts

Leave a reply

Shopping cart