Okidata Color C610 , C711 Fuser Replacement – 44289101

 

Instructions for the Okidata Color C610 , C711 Fuser Replacement – 44289101

The fusing units in these machines are considered consumable supplies. The life of these fusers are rated at around 60,000 prints. You can look in the supplies menu for the usage percentage of the unit in case you are wondering. When the supply reaches X percentage it will start warning you that it is getting close to replacement time. I’m not sure on these machines but on lots of models once its life is up it no longer prints. Below is the  Okidata Color C610 , C711 Fuser Replacement instructions along with links to buying options on purchasing a replacement fuser –  44289101

The consumables in lots of these Okidata machines use fuses. When the machine first turns on after you replace a consumable, like a imaging unit or fuser, the fuse blows and the machine knows to reset the counter. Therefore if you take a used one out of an old machine the life counter will not reset. If you do not replace the part correctly you can also have issues. These fusers can be manually reset with a little work but unless your a skilled technician I would not recommend trying it. Most people are better off just replacing the consumable and getting on with life.

Okidata Color C610 , C711 Fuser Replacement Procedure

Note : The fusing unit heats up to 350 to 425 decrees. If you touch the wrong part you will be burnt before you know it. If the machine has been in operation you should let the unit sit 15 to 30 minutes powered off before replacing this part.

The fuser is located inside the printer just behind the four image  drum units.
1. Press the cover release and open the printer’s top cover  fully.
2. Identify the fuser handle on the top of the fuser unit.

Okidata C610, C711 fuser replacement

3. Pull the two fuser retaining levers towards the front of the  printer so that they are fully upright.
4. Holding the fuser by its handle, lift the fuser straight up  and out of the printer. If the fuser is still warm, place it on a  flat surface which will not be damaged by heat.
5. Remove the new fuser from its packaging and remove the  transit material.
6. Holding the new fuser by its handle, make sure that it is the  correct way round. The retaining levers should be fully  upright, and the two locating lugs should be towards you.
7. Lower the fuser into the printer, locating the two lugs into  their slots in the metal partition which separates the fuser  area from the image drums.
8. Push the two retaining levers towards the rear of the  printer to lock the fuser in place.

Okidata C610, C711 fuser installation
9. Finally, close the top cover and press down firmly at both  sides so that the cover latches closed.

Oki Fuser Kit, 120V, 60000 Yield (44289101)

Price: $324.00

3 used & new available from $283.93

Okidata 44289101 Fuser Unit


$220.66


Walmart.com



as of March 31, 2018 6:44 pm

Okidata Oki 44289101 Fuser Unit for OKI C610, C711Fuser unit ensures maximum performance for all your Okidata productsCompatible to use with OKI series printers: C610, C711Sold as each

We will be happy to hear your thoughts

Leave a reply

Shopping cart