Xerox Workcentre 6400 Fuser needs replacement – Replace it NOW

 

Xerox Workcentre 6400 Fuser needs replacement Message

Now, if your getting the  Xerox Workcentre 6400 Fuser needs replacement – Replace it NOW   message and your wondering what to do and your machine is not working then you haven’t been paying attention because the machine should have told you to reorder this part a while back. Unfortunately, I know how this can happen. There is a million status messages on these machines. I’ve worked on machines that until you start clearing some of the status messages you have no idea what is going on in the machine and what parts need to be replaced or ordered.

The life on these fusers is around 130,000 to 150,000 pages. The life counters are on revolutions of the parts inside the unit, counting warm up cycles. That means if you mainly do large jobs then it will last longer than if you print 1 or 2 pages at a time. Therefore, not every fusers life is going to be the same.

Xerox Workcentre 6400 Fuser needs replacement

The good news is that the fuser is relatively easy to replace and the counter shouldn’t be that hard to reset either. Click on the links in this article to get the fusing assembly on order and click on the link below for the fusing assembly replacement instructions along with the counter reset procedure.

Xerox Workcentre 6400 Fuser Replacement and Counter Reset

Click on the link below for up to the date fuser pricing and buying options.

Xerox 115R00059 ( 110 V ) – fuser kit – for WorkCentre 6400S, 6400X, 6400XF, 6400XM

We will be happy to hear your thoughts

Leave a reply

Shopping cart