HP Color M551, M575 50.13 Fuser Error Message
The M551, M575 ro.13 Fuser Error is related to a low temperature reading in the fusing assembly. Several things can cause this problem and sometimes you might be able to solve this problem without replacing the fusing unit. Read the article below to find out what the error means and how to go about troubleshooting the problem and get the machine working again. If the tips fail to fix the problem then click on the link to buy the fusing assembly and follow the instructions to replace the unit.
–
–
Additional Troubleshooting Advice
1. Turn the machine off then back on
2. Check the power source. Make sure it is plugged into a wall outlet and not a power strip or battery backup.
3. Reseat the fusing assembly
4. Replace the fusing assembly
Service Manual Advice for the M551, M575 50.13 Fuser Error
Low fuser temperature 3
1. Remove and then reseat the fuser. Remove any residual paper in the product.
2. Check the paper type setting using the product menus and in the printer driver. Making sure that
they match and are correct for the type of media being used.
3. If this product has been previously serviced, check the connector (J50) on the DC controller PCA.
4. If the error persists, replace the fuser. – HP – Fuser kit ( 110 V ) – for LaserJet Enterprise 500, color flow MFP M575, M551, LaserJet Pro 500
 Click on the link below for the fuser removal procedure
HP Color LaserJet M551 – M575 Fuser Removal and Reset
