Print Unable 68 – Fuser Error on the Brother 8480, 8890, 8080, 8085

 

Troubleshooting the Print Unable Fuser Error on the 8480, 8890, 8080, and 8085 Machines

The Print Unable 68 Message on these machines is related to a temperature rise when the heating lamp should be at an off state. Not one of the more common fuser errors but still one worth mentioning as the most common issues related to these machines are caused from the fusing assembly.

Brother 8480, 8890 Print unable 68 photo

Most fuser  related problems are false alarms. Lots of times they are related to sudden power outages and false error messages. Majority of the time you can manually reset the message through maintenance mode and it worse case scenarios replacement of the fusing assembly. To try to  manually reset the message let the machine sit for 15 to 30 minutes turned off and turn back on. If it goes to  a ready state then try a print or copy job. If it comes up with the same error or a different related fuser  error on start-up then there are two ways to enter Maintenance mode. First, and easiest, hold down the Menu button then turn the machine on while holding down. Once the display reads Maintenance press ( 9, 9 ) and the machine will reset. Second, Press the buttons Menu, * , 2 , 8 , 6 , 4 . If done correctly the lights will blink and the display will read Maintenance. It might take a few times but with patience it can be done. Just press the buttons and don’t pay attention to what the display says while pressing them. Once in maintenance mode press 9 , 9  . The machine will exit out of maintenance mode and start the normal warm up procedure. If the message was a false alarm then the machine will operate as normal. If the message or another fuser error message returns then the next step is to replace the fusing assembly.


For Fuser Replacement Instructions Click On the Link For Detailed Illustrated Instructions

Brother MFC 8480DN, 8890DW  Replace Fuser Procedure

For Additional  Details and Buying Options Click on the Link Below
Brother Fusing Assembly LU7939001, LU8233001  DCP-8080DN  8480DN  8890DW



We will be happy to hear your thoughts

Leave a reply

Shopping cart