Replace Fuser Error, Restart Printer, Xerox Phaser 6500 / WC 6505

 

Diagnostic Aids to Resolve the Replace Fuser Error, Restart Printer Message , Phaser 6500 / WC 6505

The Replace Fuser Error message is a result of the fusing assembly, Xerox Phaser 6500 / WC 6505 Fuser Assembly, 604K64582, hitting the end of its life. Hopefully, you noticed the replace fuser soon message previously so you have a fusing assembly on hand to replace.

Entering Service Diagnostics
1. Turn the printer Off.
2. Press and hold the Up and Down arrows simultaneously and turn the printer On.
3. Release the buttons when Service Mode and ESS Diag appear on the SFP display, or Service Mode, Printer, and Fax/Scanner appear on the MFP display.

Service Manual Instructions

1 Check the life counter value of the Fuser Assy. Does the life counter value show the near of the end?
Replace the Fuser Assy.
After replacing the Fuser, be sure to reset the Fuser counter.
2 Check after resetting the Fuser Assy.
Reseat the Fuser Assy.
Does the error still occur when the power is turned Off and On?
Yes – Go to step 3.
No – Complete.
3 Check after replacing the Fuser Assy.
Replace the Fuser Assy.
Does the error still occur when the power is turned Off and On?
NOTE: After replacing the Fuser, be sure to reset the Fuser counter.
Yes – Replace the MCU Board.
No – Complete.

Xerox Phaser 6500 / WC 6505 Fuser Assembly, 604K64582 Removal Procedure

Warning : Allow the Fuser to cool before using this procedure.
1. Open the Front Cover.
2. Lower the Transfer Belt.
3. Pull the lever to release the lock.
4. Swing the right side of the Fusing Unit toward you with the lever released to unplug the Fusing Unit connector

Xerox Phaser 6500 and WC6505 Fuser Replacement 1Xerox Phaser 6500 and WC6505 Fuser Replacement 2

Reset Fuser Life Counter Procedure
6. Reset the Fuser counter.
a. Power on the printer and allow it to reach Ready.
b. Press the Menu button (SFP) or System menu button (MFP).
c. Select Admin Menu > Maintenance (Mode) > Reset Fuser.
d. Click OK, then OK again at the Are you sure? prompt.
7. If the Fuser being replaced is at end of life, it is highly recommended that the Feed Roller and Separator Holder also be replaced.

Xerox Phaser 6500 and WC6505 Replace fuser soon photo

If after you have read this article you find yourself looking for a replacement fuser click on the links below for buying options and additional details.
Xerox Phaser 6500 / WC 6505 Fuser Assembly, 604K64582

Brother HLL8350CDW Wireless Color Laser Printer, Amazon Dash Replenishment Ready

Price: $798.78

18 used & new available from $399.99

HP Laserjet Enterprise 500 Color M551dn, (CF082A)

Price: $1,744.99

9 used & new available from $449.99

We will be happy to hear your thoughts

Leave a reply

Shopping cart