50.7 Fuser Error – HP Color Laserjet 3000, 3600, 3800, and CP3505
50.7 fuser error – HP Color Laserjet 3000, 3600, 3800, and CP3505
HP used to give you just one or two general error codes for fusers. Now they are getting more specific in detail so you can troubleshoot errors, like the 50.7 fuser error, making them easier and hopefully resolving the issue without buying unwanted parts.  One important issue that has been known to cause problems with fusers is surge arrest or power strips. More and more electrical devices are being used in offices everyday. With that comes power strips to make sure everything can be plugged in and used. LaserJets are like big heaters, they draw a lot of power so they need to be plugged into their own socket and make sure no other heating device like a  coffee maker, copier, or space heater is plugged into the same circuit.  HP machines like the HP Color LaserJet 3000, 3600, 3800, CP3505  have a certain time frame in which to get to its correct operating temperature so if other large devices are drawing power on the same circuit it could cause these machines to work incorrectly possibly resulting in a 50.7 fuser error. If you were to call HP one of the first questions they always ask is if the machine is plugged straight into the wall or on a power strip or battery back up.
HP 3600, 3800, CP3505 Fuser RM1-2763-020
HP Color LaserJet 3000, 3600, 3800, CP3505 Fuser Removal
1. Open the upper cover, and then squeeze the two blue fuser-locking levers to release the fuser.Rotate the fuser up and out of the printer.
Troubleshooting the HP Color Laserjet 3000, 3600, 3800, and CP3505 50.7 Fuser Error
1. Verify the fuser is installed correctly and fully seated.
2. Check that fuser connector J705, fuser motor connector J5008, and driver PCA connector J213 are seated correctly.
3. Replace the fuser drive assembly.
4. Replace the DC controller PCA.
Conclusion About the 50.7 fuser error in your HP Color Laserjet 3000, 3600, 3800, and CP3505
OK, that’s how you test the unit. If you’re not technical I wouldn’t worry too much. Pretty much if you get the 50.7 fuser error on your HP Color LaserJet 3000, 3600, 3800, CP3505 turn off the machine unplug machine, make sure it’s plugged into a wall socket, let it sit for 10 to 20 minutes, then plug back in and turn on. If that doesn’t fix it then you will have to replace the fuser. Like I’ve said before in other post. Service companies love to mark up parts and charge steep repair rates to handle this simple replacement. Even if you feel like having someone do the repair I would recommend ordering in the part and then have them replace the part you ordered to save some money. Click on the link below to order the part. Hopefully, these tips have helped solve your 50.7 fuser error in your HP Color Laserjet 3000, 3600, 3800, and CP3505.
HP 3600, 3800, CP3505 Fuser RM1-2763-020
Additional Printer Repair Articles can be found at : http://www.metrofuser.com/
