Xerox XD 100, 102, 105, 120, 130,155 H4 Error and Drum counter Reset
In this article I’d like to discuss the Xerox XD 100, 102, 105, 120, 130,155 H4 Error and Drum counter Reset.
DIAGNOSTICS:
To enter diagnostics: Turn on the power and within 4 seconds press the following sequence: ‘Clear’, ‘Exposure Mode’, ‘Clear’, ‘Exposure Mode’ (Exposure Mode is the button on the far left). The console will go completely blank.
To enter a code: Select the first part of the code using the copy quantity buttons, followed by the ‘Print’ button, then the second part of the code followed by the ‘Print’ button again.
To exit diagnostics: Press ‘Clear’ repeatedly or turn the power off.
*To clear a fuser code:(14) Enter diagnostics, select ’14’ followed by ‘Print’… exit diagnostics.
**To Clear a U2 code:(16) Enter diagnostics, select ’16’ followed by ‘Print’ … exit diagnostics.
Checking the Total Copy Count:(22-5)
Enter diagnostics, select ’22’, ‘Print’ followed by ‘5’, ‘Print’…The copy count will flash 3 digits at a time for a total of six digits (for example: 012 345 would indicate 12,345 copies).
(Can also be done by the customer by holding the ‘Clear’ button for 7 seconds)
Checking the Drum Cartridge Count:(22-12)
Enter diagnostics, select ’22’, ‘Print’, followed by ’12’, ‘Print’…The copy count will flash 3 digits at a time for a total of six digits (for example: 002 345 would indicate 2,345 copies).
Drum Count Reset:(24-7)
Enter diagnostics, select ’24’, ‘Print’, followed by ‘7’,’Print’, followed by ‘Print’ again. This resets the drum count to zero.
Find printer service newsletters, parts, and more at: http://www.feedroller.com/
