Samsung ProXpress M4070FR Fuser Replacement Pointers
Samsung ProXpress M4070FR Fuser Replacement Pointers – Beneath you likely will notice the illustrated fuser replacement instuctions. These fusers are rated at more or less 90,000 pages. Fairly typical symptoms of old fusers are wrinkles or indents on the pages, open, low, or high heat errors, and several print quality problems. These fusers are rather simple to pull out so it shouldn’t do any harm to take a couple of minutes to take it out and evaluate it if you are experiencing issues you may think are connected to it.
Samsung JC91-01023A Fuser
$175.00 in stock
Features
- This Is An O.E.M. Authorized Part
- Fits With Various Samsung Brand Models
- Oem Part # Jc91-01023A
- Brand Name: Samsung
Samsung ProXpress M4070FR Fuser Replacement Pointers
1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.
JC91-01023A Samsung ML-3312 OEM Fuser (GENUINE Samsung OEM)
M3370 fuser replacement 1of2
M3370 fuser replacement 1of2.
M3370 fuser replacement 2 of 2
M3370 fuser replacement 2 of 2.
