Mar 142017
 
 

Samsung ProXpress M4020ND Fuser Replacement Directions

Samsung ProXpress M4020ND Fuser Replacement Directions – Below you will discover the illustrated fuser replacement directions. These fusers are graded at more or less 90,000 pages. Universal indicators of old fusers are creases or indents on the pages, open, low, or high heat errors, and various print quality concerns. These fusers are considerably uncomplicated to detach so it really doesn’t do any harm to take a couple of minutes to take it out and go through it if you are observing ailments you may think are related to it.

Last updated on September 24, 2018 3:44 pm

Samsung ProXpress M4020ND Fuser Replacement Directions

1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.

Samsung ProXpress M4020ND Fuser Replacement
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.

Samsung JC91-01023A Fuser / Samsung ProXpress M4020ND Fuser

$146.22
$125.93
6 new from $125.93
Buy Now
Amazon.com
as of September 24, 2018 3:44 pm

Features

  • This is an O.E.M. Authorized part
  • Fits with various Samsung brand models
  • Oem part # JC91-01023A

Samsung ProXpress M4020ND Fuser


M3370 fuser replacement 1of2

M3370 fuser replacement 1of2.

M3370 fuser replacement 2 of 2

M3370 fuser replacement 2 of 2.