FastTech - Android tablets, phones, and TV sticks at great prices.
Mar 142017
 
 

Samsung ProXpress M3820ND Fuser Replacement Guide

Samsung ProXpress M3820ND Fuser Replacement Guide – Below you likely will see the illustrated fuser replacement steps. These fusers are rated at near 90,000 pages. Characteristic evidence of worn out fusers are wrinkles or indents on the pages, open, low, or high heat errors, and a variety of print quality concerns. These fusers are quite uncomplicated to pull out so it shouldn’t hurt to take a couple of minutes to take it out and investigate it if you are observing complications you may think are related to it.


Samsung ProXpress M3820ND JC91-01023A Fuser Unit – 110 / 120 Volt (Genuine) – $149.95

Samsung ProXpress M3820ND Fuser Replacement Guide

1. Remove the duplex unit if the machine has one.
2. Open the rear cover and then remove it by releasing both hooks.
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get burned. Before replacing it, make sure that fuser unit has cooled.
3. Open the Frame-Rear by pushing both green points.

Samsung ProXpress M3820ND Fuser Replacement
4. Remove the Frame-Rear by releasing both hooks.
5. Remove the exit sensor holder after removing 2 screws.
6. Remove 4 screws.
7. Release the fuser unit.
CAUTION
When reassembling the fuser unit, do not forget to tighten these screws.


Samsung JC91-01023A Fuser Unit – 110 / 120 Volt (Genuine) – $149.95
Genuine Samsung ProXpress M3820ND JC91-01023A Fuser Unit – 110 / 120 Volt; Fuser Assembly / Unit – Genuine Samsung Fuser Assembly – Estimated Yield 90,000 pages

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>