Savin MP 3353 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Savin MP 3353 Feed Roller Kit Replacement – Beneath you will discover the changing steps for the pick up, feed, and separation rollers for the cassette trays on this model. From the PM tables, within the manual, it just says to clean off these during the course of every servicing cycle. At the same time, we understand they’ll eventually have to be swapped out.
Verifying Savin MP 3353 Feed Roller Kit Replacement
Sight, feel, age, and copy count are concerns I take into consideration when deciding on replacing of the feed rollers. Do they have a shine to them and is the texture drastically changed in spots or overall? And have they ever been replaced and exactly how many pages are actually ran through on them? When they have a gleam they are commonly either becoming worn or old. If they have little texture or tread then again they are worn. Gradually the rubber gets dried out and hardens and can also create weak feeding although it appears to provide sufficient tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m in contact with one where they contain anything over 100,000 on them I’m generally proposing complete replacement.
Savin MP 3353 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Alert : A few of the details down the page might not be needed. Now and again these service manual are inclined to require sections removal that may be prevented. I’d personally try to take out the separation roller along the side of the model prior to committing to tearing the back covers and duplex unit out.
Savin MP 3353 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Savin MP 3353 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Savin MP 3353 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Savin MP 3353 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Savin MP 3353 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Savin MP 3353 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
