Lanier MP 3352 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Lanier MP 3352 Feed Roller Kit Replacement – Beneath you can notice the replacement information for the pick up, feed, and separation rollers for the cassette trays on this piece of equipment. Within the PM tables, within the manual, it simply says to wash these in the course of each routine service cycle. But, we recognize they’ll eventually have to be switched out.
Verifying Lanier MP 3352 Feed Roller Kit Replacement
Sight, feel, age, and copy count are aspects I take into consideration while evaluating replacing of the feed rollers. Do they possess a gleam to them and is the feel drastically changed in spots or completely? Or have they ever been replaced and just how many pages happen to have been ran through on them? If they’ve got a gleam they are typically either getting worn or old. If they have little texture or tread then again they are worn. As time passes the rubber gets dried out and stiffens and might generate less than ideal feeding even though it appears to hold a great deal of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m in contact with one where they have anything over 100,000 on it I’m in all likelihood recommending complete replacement.
Lanier MP 3352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Advice : A portion of the directions listed below might not be needed. In some cases these service manual have a tendency to ask for items removal that could be sidestepped. I would try to remove the separation roller on the side of the device before you commit to tearing the back covers and duplex unit out.
Lanier MP 3352 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Lanier MP 3352 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Lanier MP 3352 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Lanier MP 3352 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Lanier MP 3352 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Lanier MP 3352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
