Savin MP 2852 Feed Roller Kit Replacement AF030090, AF031090, AF032090
Savin MP 2852 Feed Roller Kit Replacement – Beneath you should encounter the installation steps for the pick up, feed, and separation rollers for the cassette trays on this equipment. From the PM tables, in the manual, it merely advises to wash them during the course of each routine service cycle. At the same time, everyone knows they’ll eventually have to be substituted.
Verifying Savin MP 2852 Feed Roller Kit Replacement
Sight, feel, age, and copy count are concerns I take into account whenever deciding replacement of the feed rollers. Do they possess a polish to them and is the feel worn away in places or overall? Or have they ever been exchanged and exactly how many pages are already ran through on them? If they have a shine they’re generally either becoming worn or old. If they have little texture or tread then again they are worn. As time goes on the rubber gets dried out and hardens and will often produce unsatisfactory feeding even though it appears to possess a considerable amount of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m touching one where they contain anything over 100,000 on them I’m in all likelihood recommending upgraded.
Savin MP 2852 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller
Advice : Some of the instructions listed below might not be essential. Sometimes these service manual have a tendency to necessitate items removal which can be sidestepped. I might try to take out the separation roller along the side of the piece of equipment prior to committing to tearing the back covers and duplex unit out.
Savin MP 2852 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Savin MP 2852 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Savin MP 2852 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).
Savin MP 2852 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.
Savin MP 2852 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).
Savin MP 2852 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR |
