Savin MP 2553 Feed Roller Kit Replacement AF030090, AF031090, AF032090

 

Savin MP 2553 Feed Roller Kit Replacement AF030090, AF031090, AF032090

Savin MP 2553 Feed Roller Kit Replacement – Beneath you should acquire the installation instructions for the pick up, feed, and separation rollers for the cassette trays on this machine. In the PM tables, within the manual, it just states to clean up these throughout every servicing cycle. At the same time, we realize they will finally need to be switched out.

Verifying Savin MP 2553 Feed Roller Kit Replacement

Sight, feel, age, and copy count are circumstances I take into consideration whenever analyzing replacement of the feed rollers. Do they possess a shine to them and is the feel decayed in areas or all together? Or have they ever been upgraded and exactly how many pages are already ran through on them? When they have a polish they are typically either becoming worn or old. If they have little texture or tread then again they are worn. In time the rubber gets dried up and hardens and will deliver weak feeding even though it appears to hold an abundance of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. However, if I’m in contact with one where they’ve got anything over 100,000 on it I’m most likely advising replacement.


Savin MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95

AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller

Advice : A portion of the steps down the page are probably not needed. Occasionally these service manual are inclined to necessitate components removal that may be ignored. I’d attempt to remove the separation roller along the side of the device before you commit to removing the back covers and duplex unit out.

Savin MP 2553 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Savin MP 2553 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Savin MP 2553 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).

Savin MP 2553 Cover Removal

Savin MP 2553 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.

Savin MP 2553 Duplex Unit Removal

Savin MP 2553 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).

Savin MP 2553 Feed Roller Kit Replacement

 


Savin MP 2553 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR
We will be happy to hear your thoughts

Leave a reply

Shopping cart