Savin MP 2352 Feed Roller Kit Replacement AF030090, AF031090, AF032090

 

Savin MP 2352 Feed Roller Kit Replacement AF030090, AF031090, AF032090

Savin MP 2352 Feed Roller Kit Replacement – Beneath you can view the repair advice for the pick up, feed, and separation rollers for the cassette trays on this device. From the PM tables, in the manual, it merely advises to clean them at the time of each service cycle. But the truth is, we recognize they will inevitably need to be upgraded.

Verifying Savin MP 2352 Feed Roller Kit Replacement

Sight, feel, age, and copy count are circumstances I take into account whenever Identifying replacement of the feed rollers. Do they possess a polish to them and is the texture decayed in spots or all together? Or have they ever been changed and exactly how many pages happen to have been ran through on them? If they’ve got a gloss they’re commonly either becoming worn or old. If they have little texture or tread then again they are worn. In the long term the rubber gets dried out and stiffens and will often be responsible for undesirable feeding even though it appears to have a good deal of tread. On most these machines 150,000 to 200,000 pages on a set of feed tires is about average. Although, if I’m touching one where they’ve got anything over 100,000 on it I’m likely proposing replacing.


Savin MP 2352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95

AF03-2090 (AF03-2085) Separation Roller
AF03-1090 (AF03-1085) Feed Roller
AF03-0090 (AF03-0085) Pickup Roller

Advice : A portion of the procedures listed below are probably not needed. From time to time these service manual tend to necessitate parts removal which could be sidestepped. I would try to remove the separation roller on the side of the unit prior to committing to tearing the back covers and duplex unit out.

Savin MP 2352 Upper Rear Cover
1. Remove the upper rear cover (A) ( x 5).
Savin MP 2352 Lower Rear Cover
1. Remove the upper rear cover.
2. Remove the lower rear cover (A) ( x 4).
Savin MP 2352 Right Rear Cover
1. Remove:
• Upper rear cover
• Lower rear cover
2. Open the right door (A).
3. Remove the right rear cover (B) ( x 2).

Savin MP 2352 Cover Removal

Savin MP 2352 Duplex Unit
1. Remove:
• Upper rear cover
• Lower rear cover
• Right rear cover
2. Remove or disconnect two connectors (A).
3. Remove or disconnect two ground cables (B) ( x 2).
4. Remove the lower right cover (A) (spring x 2, tab x 2).
5. Remove the guide plate (tab x 2).
6. Open the duplex unit.
7. Release the front arm (A) and rear arm (B) ( x 1).
8. Slide the duplex unit to the front side, and then remove it.

Savin MP 2352 Duplex Unit Removal

Savin MP 2352 Feed Roller Kit Replacement
1. Pull out the 1st and 2nd paper trays.
2. Remove the duplex unit
3. Remove the paper guide plate (A) (tab x 2 each).
4. Replace the separation roller (A) ( x 1).
4. Replacement and Adjustment
5. Remove the roller holder (A) ( x 1).
6. Replace the feed roller (B).
7. Replace the pick-up roller (C).

Savin MP 2352 Feed Roller Kit Replacement

 


Savin MP 2352 Pickup / Feed / Separation Roller Kit (Genuine) – $17.95
Genuine MP3500-PFK Pickup / Feed / Separation Roller Kit for Ricoh Aficio MP 2852; Paper Feed Kit – Genuine Ricoh Kit – Made in Vietnam Kit Includes: (1) Pickup Roller [AF03-0090] (1) Feed Roller [AF03-1090] (1) Separation Roller [AF03-2090]; Ricoh MP3500-PFK / MP2852-KIT / RC3035KFR
We will be happy to hear your thoughts

Leave a reply

Shopping cart