Lanier LD420C Cyan Developer Replacement B230-9660, B2309660

 

Lanier LD420C Cyan Developer Replacement B230-9660, B2309660

Lanier LD420C Cyan Developer Replacement – One particular element which typically can get not addressed while dealing with print quality is the developer. Old developer could possibly lead to washed out print, full color voids, and additional issues. The developer wears out during a extensive span of time for this reason many users may not see the drop in print quality till it gets really terrible.

Due to the fact worn developer usually appears much like low toner customers have a tendency to remove and replace the toner cartridge before anything else. When individuals find that fails to resolve the issue they generally call for service. In this article you will find the developer replacement directions to help bring back the crisp radiant colors you imagine while making use of one of these expensive devices.


B230-9660, B2309660

Lanier LD420C Cyan Developer Replacement

The new drum unit has a front cover and a front joint. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first.
And use them for reassembling the new drum unit and development unit.

Entering SP Mode
1. Press the “Clear Mode” key.
2. Use keypad to enter “107”.
3. Hold down “Clear/Stop”  for 3 seconds at least.
4. Enter the Service Mode.
If you install a new drum unit, set SP 3902-xxx to “1”.
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
If you do this, then the machine will reset the PM counter for the drum unit automatically, after you turn the power on again.
Turn the machine power off.

1-2. PCU ( “PCU”)
3. Front cover [A] ( x 2)
4. Do not touch the bearing [B] after removing the front cover. The bearing is properly applied with lubricant.
Note: Remove the toner duct [G] first to avoid breaking it during this procedure.
5. Remove the bushing [C] of the development roller at the rear of the PCU ( x 1).
6. Remove the front joint [D] ( x 1, x 1).
The front joint [D] is firmly set. Remove it with a watchmaker’s or jeweller’s screwdriver.
Drum unit [E] and Development Unit [F] [G]

Lanier LD420C Cyan Developer Replacement

When the development unit is removed from the drum unit, clean the entrance mylar [G] with a vacuum.
If you change the development unit, do the ACC procedure.

3902 Turns the new unit detection flag for each PM unit on or off.
The use of these counters is explained in the PM section and in the relevant parts of section 3 (Replacement and Adjustment).

Entering SP Mode
1. Press the “Clear Mode” key.
2. Use keypad to enter “107”.
3. Hold down “Clear/Stop”  for 3 seconds at least.
4. Enter the Service Mode.

If you install a single new developer or developer unit only reset that particular developer or unit, set SP 3902-xxx to “1”.
001 Development Unit: Bk *ENG
002 Development Unit: Y *ENG
003 Development Unit: C *ENG
004 Development Unit: M *ENG
005 Developer: Bk *ENG
006 Developer: Y *ENG
007 Developer: C *ENG
008 Developer: M *ENG
A. Turn the machine power off.
B. Development unit ( “Drum Unit and Development Unit”)
7. Hopper cover [A] (hook x 3)
8. Shake a bag of developer and pour it into the development hopper [B].
9. Reattach the hopper cover (hook x 3)
10. Turn the machine power on. The machine initializes the developer and resets the PM counter for the developer. (For details of the developer initialization result, see “Developer Initialization Result” in the “Troubleshooting” chapter.
8. Do the ACC procedure.

B2309660 Cyan Developer Aficio MP C2000 Aficio MP C2000SPF B230-9660

$39.99  in stock
Item condition: New
Ended: Jun 8, 04:57PST
eBay
as of January 8, 2024 3:10 am

Ricoh MPC color copier - Changing Developer

For MPC 2000,2500,2800,3000,3300,3500,4000,4500,5000.

We will be happy to hear your thoughts

Leave a reply

Shopping cart