Lanier LD430C Yellow Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246

 

Lanier LD430C Yellow Drum Replacement B2242027, B2232027, B2232043, B2232045, B2232246

Lanier LD430C Yellow Drum Replacement – On this page is the directions for the drum and developer replacement. Ordinarily once you begin seeing color streaks or color back grounding it can be a sign that the charge grid and cleaning blade are starting to go bad. Several businesses offer up PM products and solutions to fix the drum units however with the buying price of these being somewhat cheap, I’d lean towards merely swapping the total unit because it will take limited technical experience not like fixing it which can get involved and messy.


B223-2027, B223-2043, B223-2245, B2232027, B2232043, B2232045

Lanier LD430C Yellow Drum Replacement and Developer Unit

The new drum unit has a front cover and a front joint. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first.
And use them for reassembling the new drum unit and development unit.
If you install a new drum unit, set SP 3902-xxx to “1”.
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
If you do this, then the machine will reset the PM counter for the drum unit automatically, after you turn the power on again.
Turn the machine power off.
1-2. PCU ( “PCU”)
3. Front cover [A] ( x 2)
4. Do not touch the bearing [B] after removing the front cover. The bearing is properly applied with lubricant.
Note: Remove the toner duct [G] first to avoid breaking it during this procedure.
5. Remove the bushing [C] of the development roller at the rear of the PCU ( x 1).
6. Remove the front joint [D] ( x 1, x 1).
The front joint [D] is firmly set. Remove it with a watchmaker’s or jeweller’s screwdriver.
Drum unit [E] and Development Unit [F] [G]
Lanier LD430C Yellow Drum Replacement
When the development unit is removed from the drum unit, clean the entrance mylar [G] with a vacuum.
If you change the development unit, do the ACC procedure.
A. Turn the machine power off.
B. Development unit ( “Drum Unit and Development Unit”)
7. Hopper cover [A] (hook x 3)
8. Shake a bag of developer and pour it into the development hopper [B].
9. Reattach the hopper cover (hook x 3)
10. Turn the machine power on. The machine initializes the developer and resets the PM counter for the developer. (For details of the developer initialization result, see “Developer Initialization Result” in the “Troubleshooting” chapter.
8. Do the ACC procedure.

Color Drum Unit RICOH B2242027, B2232027, B2232043, B2232045, B2232246 New OEM

$198.95  out of stock
Item condition: New
Ended: Apr 3, 19:38PST
eBay
as of February 9, 2024 4:19 pm

Ricoh Aficio MP C2500 Drum and Blade Kit Video Instructions

This is an instructional video on how to rebuild a Ricoh Aficio MPC2500 and MPC4500 drum and blade kit. If you have any questions on how to install this kit please feel free to contact us...

We will be happy to hear your thoughts

Leave a reply

Shopping cart