Oct 232016

Savin 2513F, 2513 PCU Drum Replacement Procedures

Following are the illustrated Savin 2513F, 2513 PCU Drum Replacement Pointers. The good news is that this particular PCU is relatively cheap. Furthermore, it also includes almost all the image conception sections. And as a result, your not stuck swapping out a loads of devices. As a result, if you’ve an image trouble, you will not use up a good deal of time wondering which area is resulting in the issue if you don’t have a good amount of past experience problem solving machines.

These Drums are graded at approximately 45,000 prints and copies. Usually you will receive a Replace PCU message when it is time to replace the unit.

Savin 2513 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Savin 2513F, 2513 PCU Drum Removal Technique

1. Open the right door.

Observe: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Important: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Important: 1) After installation of the brand new PCU, be certain to get rid of the Styrofoam element and to pull off the two tags.

3) Dispose of the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will promptly detect the new-found PCU and begin toner initialization.

Savin 2513F, 2513 PCU Drum Replacement

You might not have to flip off the PM Alert Message. The PM level could be placed to 45,000. On the other hand, a lot of people have turned them off by now or wouldn’t have them set up this low.

After ending PM, remove the PM counter as follows.

1. Obtain access to SP mode 7-804.

2. Hold down the Original Type key and depress the OK key (or ! key) to reset the counter. If the adjust is productive, the display screen details “Action completed.” If the adjustment does not work properly, the display screen exposes “Error!!!”

Savin 2513 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00