Ricoh Fax 4410NF, 4410L PCU Drum Replacement Technique
Down below you’ve got the Ricoh Fax 4410NF, 4410L PCU Drum Replacement Details. The good news is that this PCU is somewhat low-priced. Additionally, it is composed of lots of the image production steps. That’s why, your not trapped purchasing a large number of materials. Thus, if you’ve an image condition, you do not use up a considerable amount of time speculating which component is inducing the malfunction if you don’t have a great deal of dealings trouble-shooting devices.
These Drums are rated at more or less 45,000 pages. Typically you will get a Replace PCU message when it is time to replace the unit.
Ricoh 4410NF Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.
1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.
2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.
3. Store the PCU in a cool dry place.
4. Do not expose the drum to corrosive gases (ammonia, etc.).
5. Do not shake a used PCU, as this may cause toner and developer to spill out.
Ricoh Fax 4410NF, 4410L PCU Drum Removal Technique
1. Open the right door.
Important: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
;”>Important: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
;”>Notice: 1) After installing the different PCU, be certain to take out the Styrofoam component and to pull off the two tags.
3) Take out the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.
2) The machine will successfully detect the new PCU and begins toner initialization.
You might not have to flip off the PM Alert Message. The PM level can be set to 45,000. On the other hand, a lot of people have switched them off nowadays or might not have them defined this low.
After finishing PM, eliminate the PM counter as follows.
1. Obtain access to SP mode 7-804.
2. Hold down the Original Type key and simply click the OK key (or ! key) to reset the counter. If the adjust is effective, the control panel confirms “Action completed.” If the reset crashes, the control panel presents “Error!!!”
Ricoh 4410NF Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
