Oct 232016

Lanier LF416E, LF415E PCU Drum Replacement Techniques

On this page you will find the Lanier LF416E, LF415E PCU Drum Replacement Guide. The good news is that this PCU is reasonably economical. Also, it comes with nearly all image conception ingredients. That means, your not getting stuck switching out a massive amount equipment. And so, if you might have an image dilemma, you don’t waste a great deal of time questioning which piece is leading to the malfunction if you don’t have a lots of understanding troubleshooting machines.

These Drums are stated at near 45,000 pages. Routinely you should get a Replace PCU message when it is time to replace the unit.

Lanier LF415E Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU. 1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth. 2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface. 3. Store the PCU in a cool dry place. 4. Do not expose the drum to corrosive gases (ammonia, etc.). 5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Lanier LF416E, LF415E PCU Drum Removal Routine

1. Open the right door.

Mention: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Observation: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Remark: 1) After installing the all new PCU, be certain to take out the Styrofoam element and to pull off the two tags.

3) Take away the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will completely on its own detect the newly purchased PCU and begins toner initialization.

Lanier LF416E, LF415E PCU Drum Replacement

You might not have to switch off the PM Alert Message. The PM level could very well be allocated to 45,000. Having said that, a lot of people have turned them off by now or haven’t got them defined this low.

After concluding PM, clear away the PM counter as follows.

1. Obtain access to SP mode 7-804.

2. Hold down the Original Type key and click the OK key (or ! key) to adjust the counter. If the adjust is productive, the display screen reveals “Action completed.” If the adjustment breaks down, the display reveals “Error!!!”

Lanier LF415E Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>