Lanier LF412, LF411, LF410 PCU Drum Replacement Approach TYPE 1013

 

Lanier LF412, LF411, LF410 PCU Drum Replacement Approach

Listed below are the illustrated Lanier LF412, LF411, LF410 PCU Drum Replacement Pointers. The good news is that this particular PCU is relatively good value. Furthermore, it has many of the image formation products. Due to this fact, your not trapped changing a a great deal of materials. Hence, if you may have an image condition, you tend not to throw away a lot of time wondering which aspect is causing the condition if you don’t have a good amount of training trouble-shooting products.

These Drums are graded at roughly around 45,000 pages. Often you may get a Replace PCU message when it is time to replace the unit.


Lanier LF411 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Lanier LF412, LF411, LF410 PCU Drum Removal Technique

1. Open the right door.

Observation: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Observe: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B]. ;”>Take note: 1) After putting in the replacement PCU, be certain to get rid of the Styrofoam item and to pull off the two tags.

3) Dispose of the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will without your help detect the newer PCU and begins toner initialization.

Lanier LF412, LF411, LF410 PCU Drum Replacement

You might not have to turn off the PM Alert Message. The PM level can be set in place to 45,000. Having said that, a lot of people have turned them off at this time or haven’t got them set this low.

After concluding PM, get rid of the PM counter as follows.

1. Use SP mode 7-804.

2. Hold down the Original Type key and tap the OK key (or ! key) to reset to zero the counter. If the adjust is productive, the control panel displays “Action completed.” If the adjustment breaks down, the screen demonstrates “Error!!!”


Lanier LF411 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

We will be happy to hear your thoughts

Leave a reply

Shopping cart