Oct 232016

Lanier LF312, LF311, LF310 PCU Drum Replacement Solution

Further down are the detailed Lanier LF312, LF311, LF310 PCU Drum Replacement Advice. The good news is that the PCU is reasonably inexpensive. Moreover, it features almost all the image formation factors. Which means that, your not cornered replacing a a great deal of equipment. And thus, if you’ve an image dilemma, you really don’t dispense a great deal of time wondering which portion is responsible for the problem if you don’t have a lot of dealings trouble shooting equipment.

These Drums are posted at around 45,000 prints and copies. Customarily you will obtain a Replace PCU message when it is time to replace the unit.

Lanier LF310 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Lanier LF312, LF311, LF310 PCU Drum Removal Routine

1. Open the right door.

Observe: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Message: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Observation: 1) After putting in the new PCU, be sure to take away the Styrofoam item and to pull off the two tags.

3) Take off the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will successfully detect the new-found PCU and commence with toner initialization.

Lanier LF312, LF311, LF310 PCU Drum Replacement

You may not have to switch off the PM Alert Message. The PM level could possibly be defined to 45,000. Though, a lot of people have switched them off at this time or wouldn’t have them set this low.

After finishing PM, clear the PM counter as follows.

1. Entry SP mode 7-804.

2. Hold down the Original Type key and touch the OK key (or ! key) to reset to zero the counter. If the reset is successful, the control panel presents “Action completed.” If the reset is rejected, the display depicts “Error!!!”

Lanier LF310 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00