Oct 232016

Lanier 5613F, 5613, 5612 PCU Drum Replacement Function

Down the page you’ll find the Lanier 5613F, 5613, 5612 PCU Drum Replacement Info. The good news is that the PCU is quite low priced. Additionally, it incorporates almost all the image formation materials. Subsequently, your not caught swapping out a great deal of parts. And so, if you could have an image obstacle, you don’t commit significant amounts of time wondering which piece is responsible for the problem if you don’t have a significant amount of knowledge problem solving equipment.

These Drums are detailed at around 45,000 pages. Generally you might get a Replace PCU message when it is time to replace the unit.

Lanier 5613F Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Lanier 5613F, 5613, 5612 PCU Drum Removal Plan

1. Open the right door.

Mention: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Bear in mind: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Mention: 1) After installing the latest PCU, be sure to dispose of the Styrofoam fragment and to pull off the two tags.

3) Dispose of the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will by design detect the newly purchased PCU and starts toner initialization.

Lanier 5613F, 5613, 5612 PCU Drum Replacement

You might not have to turn off the PM Alert Message. The PM level may perhaps be specified to 45,000. However, a lot of people have turned them off at this time or don’t have them set in place this low.

After finishing PM, clear away the PM counter as follows.

1. Access SP mode 7-804.

2. Hold down the Original Type key and touch the OK key (or ! key) to reset the counter. If the adjust is productive, the control panel presents “Action completed.” If the reset does not work, the display screen shows “Error!!!”

Lanier 5613F Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>