Oct 232016

Gestetner F630 PCU Drum Replacement Process

Beneath there is the Gestetner F630 PCU Drum Replacement Directions. The good news is that this PCU is relatively economical. Simultaneously, it comes with almost all the image creation devices. As a consequence, your not cornered replacing a number of parts. Due to this fact, if you may have an image issue, you really don’t invest a considerable amount of time speculating which area is resulting in the condition if you don’t have a lots of dealings trouble-shooting machines.

These Drums are scored at somewhere around 45,000 pages. Typically you are going to get a Replace PCU message when it is time to replace the unit.

Gestetner F630 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00

The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.

1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.

2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.

3. Store the PCU in a cool dry place.

4. Do not expose the drum to corrosive gases (ammonia, etc.).

5. Do not shake a used PCU, as this may cause toner and developer to spill out.

Gestetner F630 PCU Drum Removal Solution

1. Open the right door.

Bear in mind: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.

2. Open the front door.

3. Remove the toner bottle holder or THM.

;”>Pay attention: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.

4. Detach the connector [A] and pull out the PCU [B].

;”>Observe: 1) After the installation of the different PCU, be certain to dispose of the Styrofoam piece and to pull off the two tags.

3) Take out the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.

2) The machine will simply detect the the latest PCU and commence with toner initialization.

Gestetner F630 PCU Drum Replacement

You may not have to flip off the PM Alert Message. The PM level could be set in place to 45,000. However, a lot of people have turned them off by now or don’t have them placed this low.

After finishing PM, clear the PM counter as follows.

1. Connect to SP mode 7-804.

2. Hold down the Original Type key and tap the OK key (or ! key) to totally reset the counter. If the reset is successful, the screen confirms “Action completed.” If the adjustment does not work out, the control panel reveals “Error!!!”

Gestetner F630 Black Drum Unit (Genuine) – $139.95

Retail Price: $221.95
You Save: $82.00