Gestetner 1302F, 1302 PCU Drum Replacement Operation
Down below are the detailed Gestetner 1302F, 1302 PCU Drum Replacement Details. The good news is that this particular PCU is moderately low-cost. Moreover, it comprises of almost all the image production segments. Thus, your not cornered swapping out a wide range of components. That’s why, if you could have an image problem, you really don’t waste a good deal of time questioning which piece is resulting in the malfunction if you don’t have a good amount of understanding troubleshooting products.
These Drums are graded at about 45,000 pages. Customarily you are going to get a Replace PCU message when it is time to replace the unit.
Gestetner 1302 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
The PCU consists of the OPC drum, charge roller, development unit, and cleaning components. Observe the following precautions when handling the PCU.
1. Never touch the drum surface with bare hands. If the drum surface is dirty or if you have accidentally touched it, wipe it with a dry cloth, or clean it with wet cotton and then wipe it dry with a cloth.
2. Never use alcohol to clean the drum. Alcohol will dissolve the drum surface.
3. Store the PCU in a cool dry place.
4. Do not expose the drum to corrosive gases (ammonia, etc.).
5. Do not shake a used PCU, as this may cause toner and developer to spill out.
Gestetner 1302F, 1302 PCU Drum Removal Approach
1. Open the right door.
Mention: Do not forget to open the right door. The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
Notice: If working on a toner-bottle model, clean away all spilled toner from the toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
Remark: 1) After installing the different PCU, be sure to take out the Styrofoam chunk and to pull off the two tags.
3) Take off the foam cushion [A] and pull the tabbed strips [B] all the way out of the PCU. Then close the front door.
2) The machine will by design detect the newer PCU and begins toner initialization.
You might not have to flip off the PM Alert Message. The PM level could possibly be allocated to 45,000. But the truth is, a lot of people have turned them off these days or don’t have them specified this low.
After ending PM, get rid of the PM counter as follows.
1. Connect to SP mode 7-804.
2. Hold down the Original Type key and simply click the OK key (or ! key) to totally reset the counter. If the adjust is productive, the display screen displays “Action completed.” If the adjustment does not work, the control panel demonstrates “Error!!!”
Gestetner 1302 Black Drum Unit (Genuine) – $139.95
Retail Price: $221.95
You Save: $82.00
