Oct 182016
 
 

Kyocera TASKalfa 300i C6120 Error Code Maintenance Suggestions

Kyocera TASKalfa 300i C6120 Error Code takes place when the fusing assembly states a substantial temperature reading. Several situations result in this trouble. So here you’ll find some repair ideas for this error coupled with urls to get a replacement fuser and also at the bottom of the article content, you will find a hyperlink to the illustrated fixing assembly replacement guidance.

Kyocera TASKalfa 300i C6120 Error Code

$175.56
1 new from $175.56
Amazon.com
Last updated on May 27, 2018 1:57 am

Notice : fixing assembly Associated Error Codes can result in the unit be unable to work prior to the code is reset in Maintenance Mode. Here is a hyperlink to the guidelines in order to reset the code via the maintenance menu.

Kyocera TASKalfa 300i Fuser Error Reset Technique – 302K593060


Service Manual Hints and tips for the Kyocera TASKalfa 300i C6120 Error Code 

Unusually very high fuser thermistor edge temperature
Fuser thermistor 1 is detected 230°C/446°F or higher for 40 ms.

1. Installation defectiveness on fuser thermistor 1.
Confirm the mounting condition of the fuser thermistor 1. If any concern is found, remedy it.

2. Defective fuser thermistor 1.
Replace the fuser thermistor 1.

3. Defective engine PWB.
Replace the engine PWB and check for correct operation.

These types of fusers are relatively economical. Like several items on the Kyocera models, a number of instances its more affordable to simply change out the complete component or maintenance kit. Therefore, whenever you are having issues because of the fuser, I would likely just propose saving some time and money and purchase a complete replacement fusing unit. Below, you will find a url to the replacement instructions in addition to a url to order in your replacement fixing assembly.

Kyocera TASKalfa 300i Fuser Replacement Procedure

$175.56
1 new from $175.56
Amazon.com
Last updated on May 27, 2018 1:57 am


FUSER UNIT KYOCERA KM 2530 3035 3530 4030 4035 5035 Replacment

Fuser Unit KYOCERA KM2530 KM3035 KM3530 KM4030 KM4035 KM5035 KM4035 KM5035 / UTAX CD1025 CD1030 CD1035 CD1040 CD1050 / OLIVETTI DCopia 25 DCopia 35 DCopia 400, DCopia 500 DCopia 300.

Kyocera code c6000

Kyocera code c6020 Kyocera code c6050 code Kyocera KM1620 Kyocera KM1635 Kyocera KM1650 Kyocera KM2020 Kyocera KM2030 Kyocera KM2035 Kyocera KM2050 Kyocera KM2530 Kyocera KM2540 Kyocera...