CopyStar CS-3060 C6020 Error Code Servicing Tips

 

CopyStar CS-3060 C6020 Error Code Servicing Tips

The CopyStar CS-3060 C6020 Error Code takes place when the fusing unit reports a higher temperature reading. Many things may cause this difficulty. So in this particular blog post you will discover some maintenance recommendations for this error as well as links to acquire a new fuser assembly and at the lower part of the post you can find a hyperlink to the illustrated fuser unit removal directions.

CopyStar CS-3060 C6020 Error Code


Copystar CS3060 Fuser Unit – 120 Volt (Genuine) – $169.95

from: Precision Roller

Note : fusing assembly Related Error Codes can cause the device be unable to function up until the code is reset in Maintenance Mode. Further down is a url to the tips on how to reset the code through the maintenance menu.

CopyStar CS-3060 Fuser Error Reset Procedure – 302K593060

Service Handbook Suggestions for the CopyStar CS-3060 C6020 Error Code

Uncommonly elevated fuser thermistor center temperature
fusing assembly thermistor 2 is detected 230°C/ 446°F and up for Forty milliseconds.

1. Installation defectiveness on fuser thermistor Two.
Examine the mounting condition of the fusing unit thermistor 2. If any concern is determined, fix it.

2. Defective fusing assembly thermistor 2.
Change the fuser assembly thermistor Two.

3. Damaged engine PWB.
Remove and replace the engine PWB and test for accurate operation.

These kinds of fuser assembly are considerably reasonably priced. Like many pieces with the Kyocera models, quite a lot of times its much less expensive to just replace the whole part or maintenance kit. Due to this fact, if you really are having difficulties with the fuser, I would most likely merely recommend highly saving your time and cash and get a whole replacement fusing assembly. Below, you will find a url to the replacement instructions including a hyperlink to purchase in your complete replacement fuser unit.

CopyStar CS-3060 Fuser Replacement Procedure


Copystar CS3060 Fuser Unit – 120 Volt (Genuine) – $169.95

Genuine 302K593060 Fuser Unit – 120 Volt for Copystar CS3060; Fuser Assembly / Unit – Genuine Kyocera Fuser Assembly; Copystar 302K593060 / 302H093030 / 2H093030

We will be happy to hear your thoughts

Leave a reply

Shopping cart