CopyStar CS-300i C6020 Error Code Remedy Suggestions

 

CopyStar CS-300i C6020 Error Code Remedy Suggestions

The CopyStar CS-300i C6020 Error Code takes place when the fuser reports a high temperature reading. Lots of things may cause this issue. So in this particular blog post you will find some servicing suggestions for this problem along with links to acquire a new fuser assembly including at the lower part of the content you can find a web page link to the illustrated fuser replacement details.

CopyStar CS-300i C6020 Error Code


Copystar CS300i Fuser Unit – 120 Volt (Genuine) – $169.95

from: Precision Roller

Remark : fuser unit Related Error Codes could result in the device to fail to operate till the code is reset in Maintenance Mode. Down below is a url to the details on the way to reset the code by way of the maintenance menu.

CopyStar CS-300i Fuser Error Reset Procedure – 302K593060

Service Information Advice for the CopyStar CS-300i C6020 Error Code

Abnormally elevated fuser thermistor center temperature
fusing unit thermistor Two is detected 230°C/ 446°F and up for 40 ms.

1. Installation defectiveness on fusing unit thermistor 2.
Inspect the mounting state of the fusing assembly thermistor 2. If any specific concern is established, remedy a repair.

2. Damaged fusing unit thermistor Two.
Remove and replace the fuser thermistor 2.

3. Defective engine PWB.
Change the engine PWB and monitor for ideal operation.

Many of these fusing assembly are rather low-cost. Like many parts within the Kyocera products, numerous times its much less expensive to simply replace the whole part or maintenance kit. Because of this, if you actually are experiencing difficulity while using the fuser assembly, I might simply would suggest saving your time and cash and purchase a complete replacement fuser unit. Underneath, you’ll find a hyperlink to the replacement instructions plus a connection to obtain in your complete replacement fuser.

CopyStar CS-300i Fuser Replacement Procedure


Copystar CS300i Fuser Unit – 120 Volt (Genuine) – $169.95

Genuine 302K593060 Fuser Unit – 120 Volt for Copystar CS300i; Fuser Assembly / Unit – Genuine Kyocera Fuser Assembly; Copystar 302K593060 / 302H093030 / 2H093030

We will be happy to hear your thoughts

Leave a reply

Shopping cart