Oct 172016

Kyocera TASKalfa 300i C6000 Error Code Repair Recommendations

I maintain a number of these in this line of business and I don’t believe I’ve ever personally seen the Kyocera TASKalfa 300i C6000 Error code on one of these kind of pieces of equipment. Having said that, these devices are getting more aged and of course if one has had the same fusing assembly in there since you’ve had it, you might be seeing these kinds of errors. Below you can see the service manual recommendations for this specific error combined with a web page link in order to buy a great new fuser assembly as well as at the end of the article content, a hyperlink to the fusing unit replacement instructional materials

Kyocera TASKalfa 300i C6000 Error Code

1 new from $175.56
Last updated on May 24, 2018 8:31 am

Please note : fuser Corresponding Error Codes leads to the piece of equipment not to work until the code is reset in Maintenance Mode. Down below is the information on easy methods to reset the code in the maintenance menu.

Kyocera TASKalfa 300i Fuser Error Reset Procedure – 302K593060

Service Instruction Useful information for the Kyocera TASKalfa 300i C6000 Error Code

fusing unit heater break fusing unit thermistor 1 sensed a lesser amount than 40°C/104°F for 10 s throughout warm-up and ready in.

1. Defective fusing assembly heater M or S.
Repair the fuser assembly heater M or S.

2. Unit installation defectiveness on fuser assembly thermistor 1.
Check out the mounting condition of the fusing assembly thermistor 1. If any issue is observed, remedy it.

3. Fixing thermostat initiated.
Verify continuity. If none, swap out the fixing thermostat.

4. Malfunctioning PWB.
Replace the power source PWB or engine PWB and examination for correct operation.

5. Damaged fixing heater M or S wire.
Check continuity. If none, swap out the heater lamp.

Frankly, Acquiring these parts separately is often nearly impossible to find or not worth replacement. If your finding challenges using the fuser assembly and you decide it’s time for you to start repairing items then it is maybe just time for you to change out the entire fusing unit provided the expense. Beneath you will notice a connection to purchase in a replacement fusing assembly and a hyperlink to the illustrated fuser unit replacement instructional materials.

Kyocera TASKalfa 300i Fuser Replacement Procedure

1 new from $175.56
Last updated on May 24, 2018 8:31 am

FUSER UNIT KYOCERA KM 2530 3035 3530 4030 4035 5035 Replacment

Fuser Unit KYOCERA KM2530 KM3035 KM3530 KM4030 KM4035 KM5035 KM4035 KM5035 / UTAX CD1025 CD1030 CD1035 CD1040 CD1050 / OLIVETTI DCopia 25 DCopia 35 DCopia 400, DCopia 500 DCopia 300.

Kyocera code c6000

Kyocera code c6020 Kyocera code c6050 code Kyocera KM1620 Kyocera KM1635 Kyocera KM1650 Kyocera KM2020 Kyocera KM2030 Kyocera KM2035 Kyocera KM2050 Kyocera KM2530 Kyocera KM2540 Kyocera...