CopyStar CS-3060 C6000 Error Code Servicing Advice
I encounter a a number of these out in the area and I do not think I’ve previously encountered the CopyStar CS-3060 C6000 Error code on one of these kind of devices. But the truth is, these products are getting old and when you’ve had the exact same fusing assembly in there since you’ve had it, you might be seeing these kinds of errors. Below you will get the service information guidance for this kind of error as well as a web page link to purchase a new fuser unit and also at the close of the information, a url on the fuser unit replacement assistance
Copystar CS3060 Fuser Unit – 120 Volt (Genuine) – $169.95
from: Precision Roller
Mention : fuser Equivalent Error Codes may cause the equipment not to function until the code is reset in Maintenance Mode. Directly below is the assistance on how one can reset the code with the maintenance menu.
CopyStar CS-3060 Fuser Error Reset Procedure – 302K593060
Service Handbook Useful information for the CopyStar CS-3060 C6000 Error Code
fuser assembly heater break fuser thermistor 1 identified below 40°C/104°F for 10 s within the warm-up and ready in.
1. Flawed fusing assembly heater M or S.
Change out the fuser unit heater M or S.
2. Set up defectiveness on fusing assembly thermistor 1.
Look into the mounting condition of the fuser assembly thermistor 1. If any problem is found out, remedy a repair.
3. Fixing thermostat initiated.
Check out continuity. If none, remove and replace the fixing thermostat.
4. Bad PWB.
Change out the power source PWB or engine PWB and check out for ideal operation.
5. Broken fixing heater M or S wire.
Check continuity. If none, exchange the heater lamp.
Genuinely, Shopping for these parts separately is either nearly impossible to find or otherwise worth repairing. If your finding difficulties while using fusing assembly and you decide it’s time to start changing parts it is most likely just time to exchange the full fusing unit given the value. Followed below you will notice a connection to acquire in a replacement fuser unit and a hyperlink to the illustrated fusing assembly replacement guidelines.
CopyStar CS-3060 Fuser Replacement Procedure
Copystar CS3060 Fuser Unit – 120 Volt (Genuine) – $169.95 Genuine 302K593060 Fuser Unit – 120 Volt for Copystar CS3060; Fuser Assembly / Unit – Genuine Kyocera Fuser Assembly; Copystar 302K593060 / 302H093030 / 2H093030 |
