Oct 162016
 
 

Kyocera KM-3040 Fuser Replacement Procedure – 2H093030, 302K593061, 302K593060, 302H093030

Below you will find the Kyocera KM-3040 fuser replacement illustrated instructions. Also, you will find a few links to order in a replacement fuser. I’ve found that if your machine gets ok usage these fusers tend to hold up pretty well. However, if the machine doesn’t see a whole lot of usage, the fusers tend to not make it their estimated fuser life. The ones that I’ve seen, get warped fuser pressure rollers in them, that leads to intermittent jamming in the fuser area.

$175.56
1 new from $175.56
Amazon.com
Last updated on May 24, 2018 12:02 pm

Kyocera KM-3040 Fuser Related Errors
C6000 Broken fuser heater wire
6020 Abnormally high fuser thermistor temperature
6030 Broken fuser thermistor wire

Fuser Removal Procedure – 2H093030, 302K593061, 302K593060, 302H093030

Follow the procedure below to check or replace the fuser unit.

Note : Turn the power off and unplug the power cord from the wall before performing Kyocera KM-3040 fuser replacement. Also, the fuser is extremely hot. Therefore, you might want to wait 10 to 20 minutes before removing and avoid touching the hot roller or pressure roller.
1. Open the front cover.
2. Remove the clip holder.
3. Remove two screws and remove front left cover.
4. Open the left cover 1.
5. Remove two screws and remove the left cover hook.
6. Remove the screw of the front left middle cover.
7. Remove the front left middle cover.
8. Remove three connectors.
9. Remove the screw and remove the fuser unit.
10. Check or replace the fuser unit and install the unit.
11. Refit all the removed parts.

Kyocera KM-3040 Fuser Replacement Procedure

$175.56
1 new from $175.56
Amazon.com
Last updated on May 24, 2018 12:02 pm


FUSER UNIT KYOCERA KM 2530 3035 3530 4030 4035 5035 Replacment

Fuser Unit KYOCERA KM2530 KM3035 KM3530 KM4030 KM4035 KM5035 KM4035 KM5035 / UTAX CD1025 CD1030 CD1035 CD1040 CD1050 / OLIVETTI DCopia 25 DCopia 35 DCopia 400, DCopia 500 DCopia 300.