FastTech - Android tablets, phones, and TV sticks at great prices.
Oct 132016

Kyocera KM-2020 C6000 Error Code Maintenance Assistance

I encounter a number of these in this line of business and I don’t believe I’ve ever personally seen the Kyocera KM-2020 C6000 Error code on one of these units. But the truth is, these pieces of equipment are getting dated and of course if one has had the identical fusing unit within ever since you’ve had it, you could very well be seeing these kinds of errors. Below you will discover the service handbook information for this specific error alongside a website link in order to buy a fresh fusing unit as well as at the end of this content, a url on the fuser replacement instructional materials

Kyocera KM-2020 C6000 Error Code

Kyocera KM-2020 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

from: Precision Roller

Service Manual Advice for the Kyocera KM-2020 C6000 Error Code 

C6000 Broken fixing heater wire In fixing warm-up, the time to reach 50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.

1. Poor contact in the thermistor connector terminals.
Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.

2. Fixing thermistor installed incorrectly.
Check and reinstall if necessary.

3. Fixing thermostat triggered.
Check for continuity. If none, replace the fixing thermostat.

4. Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.

5. Broken fixing heater M or S wire.
Check for continuity. If none, replace the heater lamp.

Actually, Purchasing these parts one-by-one is either difficult to find or not worth replacing. If your having to deal with issues considering the fusing assembly and you decide it’s time for you to start changing items then it is very likely just time to switch out the complete fusing unit provided the cost. Underneath you will notice a link to buy in a replacement fuser and a hyperlink to the illustrated fusing unit replacement instructional materials.

Kyocera KM-2020 Fuser Replacement Procedure – – FK-410, 302C993059

Kyocera KM-2020 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

Genuine FK-410 Fuser Unit – 110 / 120 Volt for Kyocera KM-2020; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly – Estimated Yield 300,000 pages; Kyocera FK-410 / 302C993059 / 302C993058 / 302C993057 / 302C993056 / 2C993055 / 2C993053 / 2C993052 / 2C993051 / 2C993050

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>