Copystar CS-1635 C6000 Error Code Repair Help and advice

 

Copystar CS-1635 C6000 Error Code Repair Help and advice

I have a few of these out in this line of business and I do not believe I’ve actually ever seen the Copystar CS-1635 C6000 Error code on one of these particular units. Having said that, these machines are getting outdated and if you’ve had the same fuser assembly in there ever since you’ve had it, you may very well be seeing these types of errors. Below you can find the service manual suggestions for this specific error alongside a hyperlink to locate a fresh fusing unit and also at the completion of this article, a url to the fuser unit replacement steps

Copystar CS-1635 C6000 Error Code


Copystar CS1635 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

from: Precision Roller

Service Manual Advice for the Copystar CS-1635 C6000 Error Code 

C6000 Broken fixing heater wire In fixing warm-up, the time to reach 50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.

1. Poor contact in the thermistor connector terminals.
Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.

2. Fixing thermistor installed incorrectly.
Check and reinstall if necessary.

3. Fixing thermostat triggered.
Check for continuity. If none, replace the fixing thermostat.

4. Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.

5. Broken fixing heater M or S wire.
Check for continuity. If none, replace the heater lamp.

Honestly, Purchasing these parts separately is either nearly impossible to find or otherwise worth replacing. If your enduring issues while using fuser and you decide it’s time for you to start changing components then it’s likely just time to change out the complete fusing unit due to the price. Underneath you will find a url to get in a replacement fuser assembly and a hyperlink to the illustrated fuser unit replacement assistance.

Copystar CS-1635 Fuser Replacement Procedure – – FK-410, 302C993059


Copystar CS1635 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

Genuine 302C993059 Fuser Unit – 110 / 120 Volt for Copystar CS1635; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly – Estimated Yield 300,000 pages; Copystar 302C993059 / 302C993058 / 302C993057 / 302C993056 / 2C993055 / 2C993053 / 2C993052 / 2C993051 / 2C993050
We will be happy to hear your thoughts

Leave a reply

Shopping cart