Copystar CS-1620 C6000 Error Code Service Useful information

 

Copystar CS-1620 C6000 Error Code Service Useful information

I encounter a couple of these out in the area and I don’t believe I’ve at any time before noticed the Copystar CS-1620 C6000 Error code on one of these kind of machines. On the other hand, these models are getting dated and if you have had the same fuser in it ever since you have had it, you may possibly be seeing an example of these errors. Below you can see the service manual advice for this specific error as well as a url to order a new fusing unit and in addition at the completion of this content, a web page link to the fusing assembly replacement assistance

Copystar CS-1620 C6000 Error Code


Copystar CS1620 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

from: Precision Roller

Service Manual Advice for the Copystar CS-1620 C6000 Error Code 

C6000 Broken fixing heater wire In fixing warm-up, the time to reach 50°C/122°F exceeds 13.5 s, the time to reach 100°C/212°F exceeds 10 s, the time to reach the primary stabilization exceeds 10 s or the time to reach the secondary stabilization exceeds 24 s.

1. Poor contact in the thermistor connector terminals.
Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.

2. Fixing thermistor installed incorrectly.
Check and reinstall if necessary.

3. Fixing thermostat triggered.
Check for continuity. If none, replace the fixing thermostat.

4. Fixing heater M or S installed incorrectly.
Check and reinstall if necessary.

5. Broken fixing heater M or S wire.
Check for continuity. If none, replace the heater lamp.

Honestly, Shopping for these parts on their own is often hard to find or otherwise worth replacing. If your finding concerns with the fuser and you decide it’s time for you to start exchanging components it’s likely just time for you to remove and replace the entire fusing unit due to the pricing. Following you will notice a link to purchase in a replacement fuser and a link through to the illustrated fuser replacement advice.

Copystar CS-1620 Fuser Replacement Procedure – – FK-410, 302C993059


Copystar CS1620 Fuser Unit – 110 / 120 Volt (Genuine) – $139.95

Genuine 302C993059 Fuser Unit – 110 / 120 Volt for Copystar CS1620; Fuser Assembly / Unit – Genuine Kyocera Mita Fuser Assembly – Estimated Yield 300,000 pages; Copystar 302C993059 / 302C993058 / 302C993057 / 302C993056 / 2C993055 / 2C993053 / 2C993052 / 2C993051 / 2C993050
We will be happy to hear your thoughts

Leave a reply

Shopping cart