Nashuatec D2205 SC320 Error Code Maintenance Information
Great deal of the time if you see the Nashuatec D2205 SC320 Error Code the polygon motor is oftentimes locked up and has to much friction inside the motor bushing and polygon mirror post. In this article you will find what the instruction manual has to say on the issue and a handful of assistance of my own. And also, you will locate urls to select a replacement polygon motor and a link to the replacement instructions at the end of the piece of content.
Ricoh AX06-0181 Polygon Mirror Motor (Genuine) – $129.95
from: Precision Roller
Service Manual Advice for the Nashuatec D2205 SC320 Error Code : Polygon motor error
-Definition- [B]
The polygon motor does not reach its operating speed within 10 seconds after
the polygon motor on signal, or the lock signal is not detected for more than 200
ms continuously during operation.
– Possible causes –
• Polygon mirror motor defective
• Poor connection between the polygon mirror motor driver and the BICU board
• BICU board defective
Note : The laser beam bounces off the polygon mirrors which is why they should never be contacted except if of course absolutely mandatory. In addition, if you do get them scummy or notice they are dirty, they are Significantly delicate and can damage with the slightest speck of debris. Use the softest, cleanest cloth you can locate to clean them off and do not apply minor pressure.
I personally deal with these all virtually the same way. I first and foremost duplicate the condition and listen to verify that I can hear the motor fire up. If it’s not actually locked up, they have an inclination to sound like a really noisy cooling fan. You can explain it the way you prefer, however it is not in most cases hard to forget. Second, I get the motor out, remove the polygon mirror from the motor bushing, take a alcohol moist que tip and clean out the inside of the motor bushing, clean off the post on the polygon mirror with alcohol, then lubricate the two regions with a tiny bit of thin oil. Lately, I’ve been using 3 n 0ne oil. I put it back together and spin it a little bit to ascertain its free then put the machine back together again and evaluate again.
- Now if it is still locked up before you put it back in the machine, then try the process over.
- If you still hear the sound then you can try the process again or order in a replacement motor.
- You can always, just order in the replacement motor if you don’t want to try this procedure.
- And if I do this operation and I get a call back in a few weeks or months then I just replace the motor.
In the imagine below you will have a look at a picture of a equivalent motor. I have circled the section the holds the polygon mirror down. The black piece will turn so you can remove the polygon mirror assembly out of the motor bushing. Remember to switch the black object back into location when you finally reinstall the polygon mirror assembly, and as before, ensure that you do not touch the mirrors. Grab it around the base.
- Now if it is still locked up before you put it back in the machine, then try the process over.
- If you still hear the sound then you can try the process again or order in a replacement motor.
- You can always, just order in the replacement motor if you don’t want to try this procedure.
- And if I do this operation and I get a call back in a few weeks or months then I just replace the motor.
In the picture below you will see a picture of a similar motor. I’ve circled the piece the holds the polygon mirror down. The black piece will rotate so you can pull the polygon mirror assembly out of the motor bushing. Make sure that you rotate the black piece back into position after you reinstall the polygon mirror assembly, and again, make sure you try not to touch the mirrors. Grab it around the base.
Click on the link below for removal and replacement instructions
Nashuatec D2205 Laser Motor Replacement Procedure
There are other factors that can this error, but 99% of the time this will take care of your problem.Â
Ricoh AX06-0181 Polygon Mirror Motor (Genuine) – $129.95 Genuine Ricoh AX06-0181 Polygon Mirror Motor; Motor – Genuine Ricoh Part; Mfr PNs: Ricoh AX05-0141, AX060181, AX050141, Savin AX06-0181, AX05-0141, AX060181, AX050141, Gestetner AX06-0181, AX05-0141, AX060181, AX050141, Lanier AX06-0181, AX05-0141, AX060181, AX050141 |
