Lanier 5622 Laser Motor Replacment directions

 

Lanier 5622 Laser Motor Replacment directions

In this article you are going to discover the Lanier 5622 Laser motor replacement directions. The SC 320 Error is the standard reason to have to change or remove this section. Noise can be another contributing factor. As time passes, the lubes might wear reduce and it’s possible you’ll get a loud reverberation within these items as they get into gear to printing rate. Usually, my step one is almost always to clean the area, take the motor apart, clean up and lubricate the motor bushings and polygon motor shaft, and establish if that gets results.

Lanier 5622 Laser Motor Replacement Procedure

?WARNING

Turn off the main power switch and unplug the machine before attempting this operation. Laser beam can critically cause harm to your eye area.

1. Strip off the optional finisher/bridge unit, and either the tray for the optional 1-bin tray unit or optional shift tray, if these units have been installed.

2. Strip off the upper front cover [A] (1 screw, 1 hook).

3. Obtain the front cover [B] (2 pins).

4. Strip off the inner cover [C] (5 screws).

5. Pull out the copy tray [D] (1 hook [E]).

6. Strip away the toner bottle holder [F].

Note : If your just exchanging or want to take out the motor you really don’t really need to take out the whole element. Professionally, I never have. And additionally, it could provoke requiring you to do Step 8.

7. Remove the laser unit [G] (2 screws, 2 connectors).

8. After reassembling the piece of equipment, complete scanner and printer copy adjustments.

Take note : I am not intending to put that in here because I’m not precisely confident that it’s required for this repair. I’m certain, I certainly not have had to do it. What’s more, most of the people who seem to be still using these products are typically not highly surprised if print quality may be reduced over-all.

Lanier 5622 Laser Motor Replacement




We will be happy to hear your thoughts

Leave a reply

Shopping cart