Lanier 5227 Laser Motor Replacment recommendations
Down the page you’re going to obtain the Lanier 5227 Laser motor replacement instructions. The SC 320 Error is the basic source to be compelled to repair or remove this part. Noise tend to be the next thing. The older they get, the lubes will wear reduce and may perhaps get a loud disturbance out of these items as they get into action to printing speed. Generally, my 1st step usually is to clean out the component, take the motor apart, clean up and lubricate the motor bushings and polygon motor shaft, and inspect if that does the job.
Lanier 5227 Laser Motor Replacement Procedure
?WARNING
Turn off the main power switch and unplug the machine before attempting this strategy. Laser beam can significantly can damage your eyes.
1. Extract the optional finisher/bridge unit, and either the tray for the optional 1-bin tray unit or optional shift tray, if these units have been installed.
2. Lift off the upper front cover [A] (1 screw, 1 hook).
3. Strip off the front cover [B] (2 pins).
4. Take off the inner cover [C] (5 screws).
5. Take away the copy tray [D] (1 hook [E]).
6. Extract the toner bottle holder [F].
Note : If your just changing or want to detach the motor you probably have no need to remove the whole element. Truly, I never have. Furthermore, it may well provoke having to do Step 8.
7. Remove the laser unit [G] (2 screws, 2 connectors).
8. After reassembling the piece of equipment, execute the scanner and printer copy adjustments.
Take note : I’m not really preparing to put that in here because I’m not truly certain that it’s required for this servicing. I know, I at no time have had to do it. And also, most of the people which might be still using these devices usually are not highly worried if print quality is a touch lessen all-around.
