Lanier 5222 Laser Motor Replacment tips
Underneath you can obtain the Lanier 5222 Laser motor replacement details. The SC 320 Error is the basic cause to will have to change or remove this section. Sounds can be a different consideration. As time passes, the oiling wears down and you will get a loud sound off these devices as they get up to printing full velocity. Ordinarily, my starting point is usually to pull off the section, take the motor apart, clean out and lubricate the motor bushings and polygon motor shaft, and confirm if that works.
Lanier 5222 Laser Motor Replacement Procedure
?WARNING
Turn off the main power switch and unplug the machine before attempting this operation. Laser beam can critically damage the eye area.
1. Strip away the optional finisher/bridge unit, and either the tray for the optional 1-bin tray unit or optional shift tray, if these units have been installed.
2. Obtain the upper front cover [A] (1 screw, 1 hook).
3. Detach the front cover [B] (2 pins).
4. Pull out the inner cover [C] (5 screws).
5. Detach the copy tray [D] (1 hook [E]).
6. Remove the toner bottle holder [F].
Note : If your just swapping out or want to take out the motor you really will not need to take out the whole piece of equipment. Truly, I never have. On top of that, it might lead to having to do Step 8.
7. Remove the laser unit [G] (2 screws, 2 connectors).
8. After reassembling the piece of equipment, conduct the scanner and printer copy adjustments.
Be aware : I’m not really planning to put that in here because I am not absolutely confident that it’s needed for this repair service. I am sure, I at no time have had to do it. Mainly because, most people who’re still using these units are usually not extremely surprised if print quality is slightly lessen all around.
