Savin 2527 SC320 Error Code Repair Solutions
Majority of the time when you notice the Savin 2527 SC320 Error Code your polygon motor is many times locked up and possesses to much friction among the motor bushing and polygon mirror shaft. In the next paragraphs you will get what the manual says on the subject and plenty of hints of my own. In addition, you will see urls to choose a complete replacement polygon motor and a link to the replacement instructions following the material.
Ricoh AX06-0181 Polygon Mirror Motor (Genuine) – $129.95
from: Precision Roller
Service Manual Advice for the Savin 2527 SC320 Error Code : Polygon motor error
-Definition- [B]
The polygon motor does not reach its operating speed within 10 seconds after
the polygon motor on signal, or the lock signal is not detected for more than 200
ms continuously during operation.
– Possible causes –
• Polygon mirror motor defective
• Poor connection between the polygon mirror motor driver and the BICU board
• BICU board defective
Note : The laser beam bounces off the polygon mirrors as a result they should never be touched except in cases where absolutely crucial. Moreover, if one does get them greasy or notice they are dirty, they are EXTREMELY sensitive and can damage with the merest speck of debris. Make use of softest, most clean cloth you can get to clean them off and do not begin using virtually no force.
I personally cope with these all essentially the in an identical way. I initially replicate the difficulty and listen to examine if I can notice the motor switch on. If it’s not locked up, they have an inclination to sound like a really noisy cooling fan. You can define it how you prefer, nevertheless it’s not generally difficult to miss. Secondly, I remove the motor out, remove the polygon mirror from the motor bushing, take a alcohol damp que tip and clean up the interior of the motor bushing, clean off the post on the polygon mirror with alcohol, then lubricate the two components with a small bit of thin oil. Lately, I’ve been using 3 n 0ne oil. I put it together again and spin it a little to guarantee that its free then put the machine together again and check again.
- Now if it is still locked up before you put it back in the machine, then try the process over.
- If you still hear the sound then you can try the process again or order in a replacement motor.
- You can always, just order in the replacement motor if you don’t want to try this procedure.
- And if I do this operation and I get a call back in a few weeks or months then I just replace the motor.
In the imagine underneath you will see a picture of a equivalent motor. I have circled the section the holds the polygon mirror down. The black piece will spin so you can pull out the polygon mirror assembly away from the motor bushing. Make sure you swivel the black element back into position whenever you reinstall the polygon mirror assembly, and once again, ensure that you do not touch the mirrors. Grip it nearby the base.
Click on the link below for removal and replacement instructions
Savin 2527 Laser Motor Replacement Procedure
There are other factors that can this error, but 99% of the time this will take care of your problem.Â
Ricoh AX06-0181 Polygon Mirror Motor (Genuine) – $129.95 Genuine Ricoh AX06-0181 Polygon Mirror Motor; Motor – Genuine Ricoh Part; Mfr PNs: Ricoh AX05-0141, AX060181, AX050141, Savin AX06-0181, AX05-0141, AX060181, AX050141, Gestetner AX06-0181, AX05-0141, AX060181, AX050141, Lanier AX06-0181, AX05-0141, AX060181, AX050141 |
