Brother HL-2170W Fuser Replacement Procedure LU2373001

 

Brother HL-2170W Fuser Replacement Procedure LU2373001

Below you will find the illustrated Brother HL-2170W Fuser Replacement Procedure. These fuser tend to last anywhere between 50,000 and 75,000 prints. Rarely do I every come across one of these machines that has over 75,000 and doesn’t have some sort of issues related to the fuser. Also, you will find links to purchase a replacement fuser and at the very end of the article, I have provided a few links to replacement models.

Last updated on March 24, 2024 10:50 am

Genuine Brother LU2373001 Fuser (Fixing) Unit – 115 Volt-by-Brother
1. Brother HL-2170W BACK COVER
(1) Open the Back cover.
(2) Release the Boss of the Outer chute ASSY from the Back cover.
(3) Release the Hook from the Side cover R ASSY.
(4) Slide the Back cover from the Main body, and remove it.

2. Brother HL-2170W OUTER CHUTE ASSY
(1) Release the Boss to remove the Outer chute ASSY from the Main body.

3. Brother HL-2170W FUSER COVER ASSY
(1) Pull down the Fuser cover ASSY.
(2) Remove the Fuser cover ASSY from the Main body.

4. Brother HL-2170W JOINT COVER SUB CHUTE ASSY
Note : I’m not 100% sure this part needs to be removed.
(1) Remove the two Taptite bind B M4x12 screws, and then remove the Joint cover sub chute ASSY from the Main body

5. Brother HL-2170W INNER CHUTE ASSY
(1) Remove the two Taptite bind B M4x12 screws, and then remove the Inner chute ASSY from the Main body

6-8. Brother HL-2170W Fuser Replacement

(1) Disconnect the Connector.
Caution : Pull out the Connector from the Housing part of the Main body left side.
(2) Disconnect the two Connectors from the Eject sensor PCB ASSY.
(3) Remove the two Taptite pan B M4x14 screws, and then remove the Fuser unit from the Main body.

Brother HL-2170W Fuser Replacement Procedure

The tricky part of this repair, for myself, is putting the exit assembly back in. This will take a little bit of patience. Also, if you have to exit assembly out, it might not hurt to clean the exit rollers inside of the machine. They are known troublemakers when they get dirty. Below you will find links to order in a replacement fuser or if you decide it’s time to move on then I’ve added a few replacement models below.
Genuine Brother LU2373001 Fuser (Fixing) Unit – 115 Volt-by-Brother

Genuine Brother LU2373001 Fuser (Fixing) Unit - 115 Volt-by-Brother

$131.84  in stock
Amazon.com
as of March 24, 2024 10:50 am

Features

  • Compatible fuser with NEW high quality components
  • Ships in generic packaging



Brother® IntelliFAX 4100e Business Class Laser Fax

Price: $759.99

4 used & new available from $275.98


We will be happy to hear your thoughts

Leave a reply

Shopping cart