Brother HL-2070N Fuser Replacement Procedure

 

Brother HL-2070N Fuser Replacement Procedure

Below you will find the illustrated Brother HL-2070N Fuser Replacement Procedure. While I like these machines and my customers like them, I find it hard to convince them to get it repaired. Unfortunately, most people tend to replace them rather than repair. However, if you find yourself having an emotional connection and can’t stand the thought of throwing it away, you might want to handle the repair yourself to save some money. Although, if you feel like trading her in for a new model, you can find some replacement machines at the end of this article.

There are two types of fusers for this model. You can either go by the serial number or the thermistor cable. One has a white thermistor cable and the other has a gray cable. If you look at step 5., I have circled the cable in question.

DCP7020, MFC7420, MFC7820N, FAX2820, FAX2920, MFC7220, MFC7225N
SERIAL NUMBER IS BEFORE E5J929990 (old I style) – LM6721001

- 10%
Added to wishlistRemoved from wishlist 0
OEM new Brother D00PXK001 PRINTED P COVER MFC FRA W - Brother PRINTED

DCP7020, MFC7420, MFC7820N, FAX2820, FAX2920, MFC7220, MFC7225N
SERIAL NUMBER IS AFTER E5J929990 – LM6722001
- 10%
Added to wishlistRemoved from wishlist 0
OEM new Brother D00PXK001 PRINTED P COVER MFC FRA W - Brother PRINTED

1. Brother HL-2070N Rear Cover
(1) Remove the rear cover.
NOTE: Remove the “A” section of the rear cover while opening the rear cover slightly.

2. Brother HL-2070N Rear Chute Cover
(1) Remove the rear chute cover.
(2) Remove the paper eject actuator and the eject actuator spring.

3-4. Brother HL-2070N Exit Assembly
(2) Remove the two bind B M4x12 taptite screws and the rear chute cover spring.
(3) Remove the inner chute.
NOTE: Re-assemble the inner chute while pushing onto the pinch roller of the inner chute
with the eject roller of the joint cover ASSY.

5. Brother HL-2070N Fuser Replacement

(1) Disconnect the heater harness connector and thermistor harness connector.
(2) Remove the two cup B M4x12 taptite screws, and then remove fixing unit.

Note : The pictures below show instructions from the multifunction manual. While they look slightly different than the printer only model, they are exactly the same.

Brother HL-2070N Fuser Replacement Procedure

The tricky part of this repair, for myself, is putting the exit assembly back in. This will take a little bit of patience. Also, if you have the exit assembly out, it might not hurt to clean the exit rollers inside of the machine. They are known troublemakers when they get dirty. Below you will find links to order in a replacement fuser or if you decide it’s time to move on then I’ve added a few replacement models below.

SERIAL NUMBER IS BEFORE E5J929990 (old I style) – LM6721001

- 10%
Added to wishlistRemoved from wishlist 0
OEM new Brother D00PXK001 PRINTED P COVER MFC FRA W - Brother PRINTED

SERIAL NUMBER IS AFTER E5J929990 – LM6722001
- 10%
Added to wishlistRemoved from wishlist 0
OEM new Brother D00PXK001 PRINTED P COVER MFC FRA W - Brother PRINTED



Brother® IntelliFAX 4100e Business Class Laser Fax

Price: $759.99

6 used & new available from $275.98


We will be happy to hear your thoughts

Leave a reply

Shopping cart