Muratec MFX-3050 ADF Multiple Feeding Troubleshooting G9601178

 

Muratec MFX-3050 ADF Multiple Feeding Troubleshooting

Down the page you can find guidance for the Muratec MFX-3050 ADF Multiple Feeding Scenario. This is often one of the more ordinary difficulties you will see by using these devices when you use these items for major scanning. Down below I’ll briefly talk about this condition, you’ll see illustrations that illustrate methods to take out the broken parts, and links to acquire the replacement parts.

On more aged systems it can be impossible to acquire the total number of pages have been feed within the document feeder. Alternatively, on the newer systems, you will see it in the System Setup, Maintenance, Supply Life menu structure.

Muratec MFX-3050 ADF Multiple Feeding Troubleshooting

The separation pads are only rated around 20,000 sheets of paper. That’s not a whole lot for modern day scanning. Also, its far less than the 50,000 to 80,000 life of the feed rollers. Therefore, you might have to replace them more often than the feed rollers and they should always be replaced when replacing the feed rollers.


Muratec MFX-3050 Doc Feeder Separation Pad Only (Genuine) – $6.95

Genuine G9601222 Doc Feeder Separation Pad Only for Muratec MFX-3050; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S

Muratec MFX-3050 ADF Multiple Feeding Troubleshooting

1. In most cases, the multi feeding issues starts with occasional feeding of a few papers at one time.This leads to document jam errors and missing or cut off pages in faxes or scans. Should you overlook it long enough, it can result in large piles of documents feeding through at the same time.

2. In that respect there honestly isn’t a whole lot you can do. You could possibly just take an emery board on it or clean it off using water but it’ll come back eventually. For that reason, once you notice this start to begin, it’s ideal just to upgrade it and go forward. It’s not worth the fight. Just like any different kinds of rubber, after it becomes worn out it will probably acquire a gleam on it in the section of the feed tire and may feel smooth.

3. Change out the separation pad and maybe, the pick up assembly, based on on how the feed rollers appear.

See the illustration above to see how to replace the pick up assembly and separation pad

Click on the link below to order in your Muratec MFX-3050 ADF Roller and Separation Pad Replacement Parts to help fix or troubleshoot your Muratec MFX-3050 ADF Multiple Feeding Troubleshooting


Muratec MFX-3050 Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95

Genuine Doc Feeder (ADF) Pickup / Feed Roller Assembly for Muratec MFX-3050; Doc Feeder Part – Genuine Samsung Part

Muratec MFX-3050 Doc Feeder Separation Pad Only (Genuine) – $6.95

Genuine G9601222 Doc Feeder Separation Pad Only for Muratec MFX-3050; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S


We will be happy to hear your thoughts

Leave a reply

Shopping cart