Xerox Workcentre 3220 ADF Roller Replacement 130N01364, 130N01500

 

Xerox Workcentre 3220 ADF Roller Replacement Procedure 130N01364, 130N01500

Down below, there’s the Xerox Workcentre 3220 ADF Roller Replacement Operation. Because we move more and more in the direction of scanning materials, I’ve seen and incline with the levels of material being fed through the use of document feeders. Completely different companies establish completely different maintenance numbers with the roller and separation pad. I’d say when the roller is between 50,000 and 75,000 it generally should really be swapped out in addition the separation pad rubber is rated somewhere between 25,000 and 50,000. Below, you will locate the illustrated replacement details.

Xerox Workcentre 3220 ADF Roller Replacement tips

Indications of old rollers are weak grab. Most people make a complaint that they must sort of force the paperwork along for starters to get it started feeding inside the component and sporadic jamming will take place on a regular basis. Indicators of a old pad are multiple feeding or some like to call it, double feeding. If you find warning signs of either one of these kinds of situations the best option is to remove and replace these sections. In general if your experiencing difficulity feeding, washing the rollers off slightly should get it back performing once more for a bit of time until you can get the components obtained. Multiple feeding is commonly more frustrating and is challenging to get it functioning properly till the separation pad is changed.


Xerox Workcentre 3220 Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)

Xerox Workcentre 3220 ADF Roller Replacement Procedure

1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..

Xerox Workcentre 3220 ADF Roller Replacement

Xerox Workcentre 3220 ADF Separation Replacement Procedure

1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.

Xerox Workcentre 3220 Separation Replacement

There you have it. This job is pretty easy and has minimal cost.

Click on the link below to order in your Xerox Workcentre 3220 ADF Roller and Separation Pad Replacement Parts


Xerox Workcentre 3220 Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95

Genuine 130N01364 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Xerox Workcentre 3220; Doc Feeder Part – Genuine Samsung Part; Xerox 130N01364 / 130N01500

Xerox Workcentre 3220 Doc Feeder Rubber (Genuine) – $49.95

Genuine 019N00566 Doc Feeder Rubber for Xerox Workcentre 3220; Doc Feeder Part – Genuine Xerox Part




We will be happy to hear your thoughts

Leave a reply

Shopping cart