Xerox Phaser 6110MFP ADF Roller Replacement Procedure 130N01364, 130N01500
Just below, you will find the Xerox Phaser 6110MFP ADF Roller Replacement Process. As we move more and more when it comes to scanning pages, I’ve seen and incline with the number of material being fed via document feeders. Various models set differing maintenance levels with the roller and separation pad. I’d assert if the roller is between 50,000 and 75,000 it often should really be swapped out in addition the separation pad rubber is rated somewhere between 25,000 and 50,000. Down the page, you will discover the illustrated replacement directions.
Xerox Phaser 6110MFP ADF Roller Replacement tips
Indication of worn out rollers are ineffective pickup. Nearly all people make a complaint that they must kind of urge the paper documents along to begin with to get it started feeding into the component and intermittent jamming exists on an ongoing basis. Symptoms of a old pad will be numerous feeding or some like to call it, double feeding. When you see indications of either one of such problems your best option is to upgrade these pieces. Most of the time when your having difficulty feeding, washing the rollers off a little ought to get it back functioning once again for a short amount of time till you can get the pieces purchased. Multiple feeding is often more irritating and is difficult to get it performing in the right way until the separation pad is swapped out.
Xerox Phaser 6110MFP Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine)
Xerox Phaser 6110MFP ADF Roller Replacement Procedure
1. Fully Open the Document Feeder Top Cover to expose the feed rollers.
2. Release the Bushing and rotate it until it reaches the slot, as shown below. Then lift the Pick Up Assembly out..
Xerox Phaser 6110MFP ADF Separation Replacement Procedure
1. Remove the ADF pick up roller assembly
2. Either remove the white pad on top of the pad holder assembly or press in on either side of the bottom tabs and pull the whole separation pad holder assembly out and replace with the assembly. Make sure that the spring goes back in correctly. Sometimes they are stuck to the bottom of the old holder so make sure they get installed with the new holder.
There you have it. This job is pretty easy and has minimal cost.
Click on the link below to order in your Xerox Phaser 6110MFP ADF Roller Replacement and Separation Pad Replacement Parts
Xerox Phaser 6110MFP Doc Feeder (ADF) Pickup / Feed Roller Assembly (Genuine) – $34.95 Genuine 130N01364 Doc Feeder (ADF) Pickup / Feed Roller Assembly for Xerox Phaser 6110MFP; Doc Feeder Part – Genuine Samsung Part; Xerox 130N01364 / 130N01500 |
 Xerox Phaser 6110MFP Doc Feeder Separation Pad Only (Genuine) – $6.95 Genuine 022N01487 Doc Feeder Separation Pad Only for Xerox Phaser 6110MFP; Doc Feeder Part – Genuine Samsung Part – Also Works in the MP Tray Assembly Only in the Samsung SCX6345N, Xerox WorkCentre 4150S |
